Search results

I'd say ten+ years

I have a Voodoo Labs Pedal Power 2 that started humming when I first apply power to it. Pulled the cover and saw on cap bulging on top. Pulled the board and removed the suspect capacitor and sure enough, it's physically leaking on the bottom. The fix is pretty straight forward at this...

8 fuzz pedals!?!? I used a Dinner for a handful of analog pedals. Now 8 am using a Voodoo Labs unit. I don't notice anything so IMI, that's a good thing. I'm powering a few digital pedals, with the Hali and Cloudburst requiring the lions share of the MA's.

They are not powered concurrently. I ran three leads out to the switch, B,C,E.

I assembled a Rangemaster PCB I purchased off eBay (before I discovered PedalPCB!). The BOM suggested a 2N2222 transistor but also said to experiment. So I did! I hooked up a 2N2222 and a 2N2219 to a 3pdt mini toggle. With the unit on, it produces a popping sound when switching between the two...

This is interesting. I was thinking about building one of these. Now I'm not so sure. May have to wait until the issue is identified and/or resolved.

It wasn't on the bench for long, thanks to the excellent documentation and pics. The Pauper. Really, this build was like painting by numbers. I can't say I am a pedal builder, more like an assembler. But I am now looking for the next build. This isn't my first assembly project, but one thing...