Search results

Here you go. This is based off the template so verify measurements on your physical board. Led is 3mm with no bezel. Adjust to taste. Power jack is for smaller style. https://drill.taydakits.com/box-designs/new?public_key=cmVOV0lOSmxLU3NaY2EwWTIybVd3dz09Cg==

I was bored and knew this would just take a min. The led is a bit further down than most but this is where it is on the drill template. Adjust to taste. It’s a 3mm led with no bezel. https://drill.taydakits.com/box-designs/new?public_key=aDVYTXFqeEZJWS9lQ2VQREErSElFdz09Cg==

Yeah, I was going to suggest digging around and looking at Robert’s other boards for ideas. He uses standards for most things so it’s likely portions appeared somewhere else on another board. I am happy you figured one out.

I will do my standard and give it a few days. If no one has one I will create it.

I will get you one if no one else posts it the next few days. It should just be the normal 3 knob template without the middle pot.

There isn’t a posted build doc on them so unfortunately at this time you will have to create one using the actual board. When there is a build doc I can create one.

I now have the urge to watch Krull again. I also have one of these boards lying around. I should probably build it.

Led is 3mm with no bezel. Lumberg style power jack. https://drill.taydakits.com/box-designs/new?public_key=cjBuZWxlYkpCWUlPYy93bUJxR2VBZz09Cg==

Just saw this one. Give me a couple of days and I will come up with something.

Here ya go. Led is 3 mm with no bezel https://drill.taydakits.com/box-designs/new?public_key=YmxsaGdXb2ROUnFTSkUvTFpwa3VaZz09Cg==

Give me a few days. I am pretty sure I have another one I can modify to that one pretty easily. It should be a standard 5 knob with the two switches added

So I am curious what this thing does now, lol.

Here ya go. This should work. Leds are 3mm with no bezel. I made the jacks a little larger to allow for some wiggle room. Worst case scenario they need to be a hair bigger but i think this will be just fine...

I haven’t forgot I just haven’t had time. Sorry. Maybe this weekend.

Here is the template for the acoustic 360. Its not verified yet but should be soon. https://drill.taydakits.com/box-designs/new?public_key=RWw1QjIzM3VLcWxlSm5GY0pIZlkwQT09Cg==

Ewwww. I may see what I can work up. Having everything board mounted adds an extra level to the fun. Give me a few days to see if I can make something I trust and I will follow up.in the meantime maybe someone else will follow up

Here is the eq slider template. I found it on the forum. The others are pretty standard. https://drill.taydakits.com/box-designs/new?public_key=ekNLM2F3MjZPM25Wa0hUM25hMnFxUT09Cg==

Not verified but this is a good starting point on the string ringer. https://drill.taydakits.com/box-designs/new?public_key=QzE5UkFyM2RtUkdIdnlMNXMxL2puUT09Cg==

Im not saying I “will” do it but i may have a day where I am bored enough and I “might” look at it. No promises. I assume you are talking about the 6 pot eq not the sliding pot version? I can go ahead and give you a hard no if the sliding pot is what you want. A “might” is better than a no...

I should have the quadratron and spectron posted in drill templates. If not let me know and I will post them. They are verified as well