Search results

yeh need to find the time to go over it again, i was doing my usual thing of trying to put it together in a rush.

Haha, I'm literally doing the same thing at the moment This is the green russian, Its working but I need to troubleshoot very low volume - My plan is to build this, get it working, then build the civil war, a/b them, and then build the next one and a/b them til i choose my favorite. I've...

Copper clad fuzz, 2 for 2!

I'm renaming the Linear Power Booster to the Learners Permit Breadboard

Lol hard irl 😂

Is your footswitch board upside down? :oops:

I um, don't care for reverb Or tremolo Or wah Or filter Or pitch

Hahahaha $65

Yeh I had been meaning to look into the footswitch as well. I think I saw Tayda had some footswitches like this one https://www.taydaelectronics.com/4-pins-spst-momentary-soft-touch-push-button-stomp-foots-pedal-switch.html And that maybe I could clip the outer ones off, needed to look into it...

I always write these things as I think of them and not really thought out. For the lowtide is anyone aware of a relay bypass board I can buy that would fit in the lowtide around the PCB which takes up most of the 1590bb? Or perhaps I need to order a 1590bb2 and the extra depth would allow me...

I um, don't care for the sand texture :(

Two questions really. I've been jamming basic relay bypass boards into my pedals recently, and two I'd like to update, the lowtide obviously has not a lot of space to put it in, and the duocast has a channel switch - can I use the basic relay dpdt switch? or one of the intelligent relay modules...

and mine to varna sankar

Relay working after changing out the transistor and going over it again to make sure everything was connected. Now I have to fit this rats nest back into the box -I think the issue is that it needed a ground connection between the two lower jacks & or that the wrong transistor on the relay...

Ok, pulled it all apart, and I have it working without the relay. I definitely needed a ground connection between the two middle jacks, but I'm pretty sure I had that before as well. Gate is working and the light is working right now. I tested the range switch pulled off and put back on again...

@Paradox916 have I got that range switch soldered incorrectly? I have all three points on the PCB attached to each pin of an on-on switch - if I check your build pic - which is obviously a heavy influence - I think you've only connected two maybe? I've pulled it from the enclosure and now the...

Aion Heliodor Not really that interesting I thought.

Aion Maelstrom - Vintage Microtubes spec. Had to do some resistor tenting and some other wierd stuff for this one but it does sound good. Trying to work out if I also need to build a B3K or if this will do me. the attack switch does nothing on this which is mildly annoying but apparently by...

Aion Azure chorus built with a socket for the bass capacitor, sounds pretty good! I made another Aion drive and on the drilling I did it down a little lower so the knobs wouldn't be so high, and then fucked myself over because then the switch board didn't fit, so it's on a massive angle lol. Oh...

Oh, the input was connected, just not in my initial photos. Here is how it is currently wired up, green between lower jacks tip to tip, and then blue off this to the T on the board. The switched tip is to the outer connection on the board and I have a ground to the middle at the moment. Do I...