Search results

  1. C

    Boss CE1 king of chorus no chorus

    pin 4 of the tda is also giving a 40V ac signal that fluctuates down to 0 and back to around 40
  2. C

    Boss CE1 king of chorus no chorus

    Transistors and cap values all check out. Resistors too for the clock circuit. I'm starting to think maybe it has to do with the DC DC converter but I would think it should still work at least a little bit. maybe not though
  3. C

    Boss CE1 king of chorus no chorus

    I'll confirm. I even redid the c21 22 24 and 25 today in the clock circuit
  4. C

    Boss CE1 king of chorus no chorus

    I ordered a new DC/DC converter that will supply the higher current. had the 1W version and the RD (new correct one) has 2W with double the current
  5. C

    Boss CE1 king of chorus no chorus

    The only place I could get a reading was pin 3 of the 1458 and it was like 2.4hz
  6. C

    Boss CE1 king of chorus no chorus

    Still not having luck with pin 1 to gnd and pin 4 to gnd
  7. C

    Boss CE1 king of chorus no chorus

    Running at 12dc I can get -15 on pin 9
  8. C

    Boss CE1 king of chorus no chorus

    Upon some further investigation I have the RP not RD model. The RP is 1w not 2w. should be the same voltage though?
  9. C

    Boss CE1 king of chorus no chorus

    I don't seem to be getting anything. OL between pin 1 and 4 on the 1022
  10. C

    Boss CE1 king of chorus no chorus

    Mine can measure up to 50khz let me see what I get
  11. C

    Boss CE1 king of chorus no chorus

    Should I try the pedal at 12V?
  12. C

    Boss CE1 king of chorus no chorus

    I have the recom RP-1215D. And yes DMM has frequency function
  13. C

    Boss CE1 king of chorus no chorus

    yes! thats why I am hoping its not a bad chip
  14. C

    Boss CE1 king of chorus no chorus

    For the 1022 I had these voltages (DC): 1 -5.2 4 -5.6 5 -3.1 8 -5.4 9 -11 13 -10.8 12 - 5.8 Everything else is 0 or in the mV range. For IC1 and 2 i had -11 at pin 4 and 9.5/10 at pin 8
  15. C

    Boss CE1 king of chorus no chorus

    no scope on hand, the jumper is for an optional chorus depth. I have a jumper between pins 2 and 3 per build docs
  16. C

    Boss CE1 king of chorus no chorus

    I swapped all the ICs minus the 1022. Not having any luck so far. The clock seems to be working but no chorus sound
  17. C

    Boss CE1 king of chorus no chorus

    my dc/dc is around 11V which matches the build doc. I have verified all components are correct. Wiring and soldering joints look good, not really sure what else would be causing it. I swapped the LM1458 for a MC 1458 and no change
  18. C

    Boss CE1 king of chorus no chorus

    pin 8 and pin 12 I hear a chriping sound that is aligning with the rate LED
  19. C

    Boss CE1 king of chorus no chorus

    I can hear ticking off the 1458 and on some of the TDA1022 pins. Let me fire up the probe again and test again. The chorus vibrato switch works and the rate changes the LED. I could try swapping the 1458 and 072
Back
Top