Search results

Yep, both legs of R10 have strong tone. C7 has no tone, but R11 has tone on one side. I'm not sure what that info would show, but that's what I found.

I did reflow everything after posting the pic, so that doesn't seem to be the issue as far as I can tell...

Update: I reflowed the solder on the J201 and I'm getting tone from legs 2 and 3 now, as well as tone through C3 and legs 1, 2, and 3 on IC2.1. The tone on leg 1 of IC2.1 is much louder than the previous test points, which I assume means IC2.1 is doing its job. I'm getting good tone from R10 as...

I had swapped them temporarily last week to see if it made a difference, but I put them back when it didn't. They're currently in the correct place according to the silk screening on the PCB itself.

Finally some possible progress! I started working through the circuit following the image @Feral Feline posted, and I got as far as the J201 transistor before hitting an issue. I don't know if it's THE issue, but I got tone through R2 and C2, but when I touch the probe to any of the three leads...

Both posts are helpful! Honestly, I have no idea how people figured this stuff out before internet forums existed. At least not in any timely fashion!

Thanks for the info! So, just to double-check, I can feed a random tone generator signal from my phone into the pedal for testing with the audio probe?

I really appreciate the thorough once-over! I'll double-check all of these when I get home this evening!

So I'm going to put together a down-and-dirty audio probe over the next few days, hopefully, to try to pinpoint where the issue is with this pedal. Two quick questions: first, can anyone point to a good "audio probing an effects pedal for dummies" resource? I did a search in the forum, but...

Many thanks!

I saw that the Patron template works for the Double Muffin Fuzz, but I couldn't find a Tayda template for that one either. The offset switch hole has me leery of trying to tweak a more standard template. Anyone have a Tayda template for either the Double Muffin or the Patron? Thanks!

So just a quick check-in on today's troubleshooting: I went through the "Steps to Check Grounding" checklist I posted above, and everything checked out except that the backs of the pots didn't have any connection to ground. Would that be an issue? I tried it with the footswitch in both the on...

Yeah, I probably won't actually do that. :) I've been putting off the audio probe because I don't really understand what it is or how it works, but I'm thinking I've reached the point where it's time to learn a new skill...

I can definitely go in and check the caps. Heck, at this point, I might just pull all of the electrolytics and replace them, just to see what happens. I can also check the grounding for sure. Just because I haven't really gone hunting for a problem like this before, would this sequence root out...

No worries! I appreciate the advice either way! At least it gave me something new to look at for a bit. :)

Okay, so this has led to my first unexpected reading. IC1 and IC2 checked out fine based on the numbers you provided, but IC3 (the one in the middle on the PCB) had some odd readings on pins 5, 6, and 7. Instead of 4.5v like on the other two ICs, 5 was 0, and 6 and 7 were both about 8.5. 1-4 and...

Managed to get a better pic of the smd adapter: It looks right to me, but let me know if I'm missing anything!

I can confirm that all of the opamp pins are correctly seated, because I pulled them yesterday and tried other ones to make sure the issue wasn't with one of the opamps themselves. I double-checked the seating when I put them back. I can probably grab a pic of the J201 adapter board when I get...

Thanks for the tips. I don't have an audio probe, but I think I can check most of the other things you mentioned this weekend!

That's much appreciated! And yeah, I hate to give up on it, but I'm afraid at this point there's not much else to sort through that I actually know how to do. I'm going to give it another once-over this weekend, but if that comes up snake eyes, I'll reach out.