Search results

Yes, the problem is solved as you said. Best regards.

Hi, Yes, I have the same problem. spinAsm should put its own file contents in the program files x86 folder in the Windows C:\folder, but they are not there. Where does this hex output go?

I can't find a rotary encoder in my country. Actually, it would be great to use this switch, but I will go for a normal rotary switch. If we change your schematic like in the picture and add the diodes, I think we can use a normal rotary switch, there will be no problem, is that correct? Paul.

Yes, I looked at the datasheet and now I understand everything better. I'm a bit new to digital. Please excuse me. Thanks to you, I completely understood and solved the project. If you have any video demos of your card's effects, I'd love to hear them. Thanks again for everything, Paul.

So, what I'm trying to explain is which pins on your schematic should I connect the eight program modes I can select to the pins of the rotary switch? How many pins does this rotary switch have? What kind of rotary switch should it be? My other question is, which pins are the transition pins...

So, to which pin numbers exactly should I connect the rotary switch used to select the 8 programs?

Hi, Paul. I have a question. What are the exact pinouts on the back of the board, just above the eeprom? Do I need to use a rotary switch to correspond to each pin? So, do we add a rotary switch to the pinouts there? Also, is your circuit designed to read 8 effects? Best regards.

What I mean is, if the hex files can be read and written in the eeprom, the effects will work, so there is no need to convert them to bin format, right?

Açıklayayım: spinASM'den efekt çıktısından tek bir hex dosyası alıyorum ve bu hex dosyasını AsProgrammer ve ch341 eeprom adlı bir programla okuyabiliyor, hatta bir eeprom'a yazabiliyorum. Yani, size göre her şey yolunda, yani bir sorun yok. Öyle mi? Değerli üstatlar, tüm saygımla teşekkür ederim.

Hi, Yes, I understand better now. What you're trying to say is that if any program can read and write the resulting hex file, you don't need to convert it to bin format. So, load the hex file into the eeprom and insert the eeprom chip into your FV-1 effects circuit. Cheers, the effects will...

Hi, I have a question about eeprom programming. The last thing I need to do when writing eeprom effects is to use Asprogrammer and the ch341 device. That's the background. The first thing I need to do is convert the SPN effect code file I downloaded. Is this correct? To do this, I downloaded...

Merhabalar,Eeprom programlama hakkında bir sorum var. Eeprom efektleri yazarken yapmam gereken son şey Asprogrammer ve ch341 cihazını kullanmak. Arka plan bu. Yapmam gereken ilk şey indirdiğim SPN efekt kod dosyasını dönüştürmek. Bu doğru mu? Bunu yapmak için SpinAsm'ı bilgisayarıma indirdim...