Search results

Great job on all of them! You should go down the path of the overkill Lovetone pedals from AionFx. I've built them all and they're a ton of fun to build.

I've done something similar working on moving everything onto the PCB. This is for a 1590bb

Awesome build, I've been putting this one off.. along with Petty Tears.

Drill template is here

I make up for my lack of practice with diming all the knobs :)

Do you ever NOT play it with all knobs dimed? :)

A Morning Glory and a Rat together in one box. It's a tried and true combo. The PCB was easy to build despite being packed tightly. I went with a mojo lm308an for the Rat. I did screw up on labeling the footswitches, I mixed up the boost and distortion. It'll teach me to make assumptions on...

The Face Disaster is probably my favorite take on the Ugly Face. It's got a ton of tweakability and generally sounds good across all the settings. Awesome work on all three!

I just did the standard build.

Here's another one I'd been waiting to box up for awhile. Again, thanks for @chongmagic 's Tayda PDF creator I was able to very quickly get this into a file and onto an enclosure. I think it turned out awesome. I managed to make it fit into a bb2 although it calls for a bbs with some creative...

The noise ensemble is a fun circuit and there are a ton of folks building pedals off of it. The Dirge Slowly Melting is probably the most famous of them. Awesome job on the graphics!

This is the alpha one I used: SR2611F https://www.taydaelectronics.com/rotary-switch-2-pole-6-positions-alpha-sr2611f.html

For the volume, this is how I wired it. I used 9mm pots with straight tines since they're already plastic on the bottom.

On this, not at all. You just take the effect out signal and run it to pin 3 on an A100k pot, run pin 2 to the 3pdt board and pin 3 to ground.

Here is a wonderful Parametric Distortion with the mod for a volume control. The artwork was made by my daughter and I used @chongmagic 's Tayda PDF creator to get it printed. I think it turned out really well. The hardest part was getting everything crammed in there.

Catching up on circuits I've been meaning to box up. Here is Octone, a clone of Last Gasp Arts Octavella. The build was straight forward but I did have to be very careful when drilling the enclosure to make everything fit. The artwork is still going down my rabbit hole of pulp and exploitation...

I'd say your tool works well. One finished and one needing knobs installed..

Thanks! I've got a love for pulpy cinema and trashy films and trh honey dripper just called for it. Affinity is really easy to use and with waterslide decals I can move to completion in just a few hours.

Haha! I'm glad someone recognized it. It was the least racy of the few I had chosen.

Working through my backlog, here's another one I've boxed up. The Honey Dipper, I know there are a few demos around for it so I'll save you my guitar playing. Since it does the bow chiki wow sounds my mind immediately went to trashy 70s sexploitation films so I found a good trashy movie poster...