Search results

Just replaced the 100k with the 25k and the 1n with a 2.2n. Dead on sweet even tone. I really dig it now. Thanks for the input and suggestions.

About to build the Champ Stamp but still not sure based on this thread what to use as a sub for BAT48. Could get one from Mouser I believe but would think there's some diode I already have on hand I could use. Any sub suggestions? Thx

Ok I will alligator clip a 33k in place first and give it a listen. If it's still a bit trebly would you suggest upping the values on C1 & C7? If so, what values would you suggest? Thanks for posting!

The Urushiol I've built is a smokin' little box but is a bit too trebly. I'm sure that's how the original design was intended but I wouldn't mind experimenting with some other cap values to thicken up the brew. I'm thinking C1 and C7 are the caps to work with but honestly I'm still pretty new at...

Gotcha. I just placed a Tayda order and added the 9V diodes. Thanks for the input.

I'm out of 9V diodes but have 12Vs on hand. Can I use a 12V as a sub for the Prince Albert OD?

Ok that makes sense. I'm probably going to pick up the Powersound Boost as well. Does that have the same gain scenario?

Changed out the B10k with the C1k. Worked like a champ. Pretty new to building and just curious as to why you suggested the 1k value instead of replacing the B10k with a C10k? Thanks!

Gotcha, will do. Thanks, Robert

I built the Powersound OD without the build docs being posted since all the values are printed on the circuit board. It works fine except there's an explosion of gain and volume at the 9.5 tail end point of the Drive knob. Perhaps I should have waited for the build docs assuming there was going...

Good deal. Thx

Or maybe I should say, has anyone on the forum traced the 4 knob version?

I saw where Robert mentioned how he got the 3 knob Stellar Drive traced but couldn't get a hold of the 4 knob. It's such an outstanding pedal. Does anyone know of a 4 knob clone. Blending with the clean knob seems to work brilliantly.

I just looked through my bag of sockets and realized I have a couple of those 14 sockets. What did you use to cut those down to size? Maybe a hacksaw blade?

Ok, thanks for the links. I'll get on it.

I'm about to solder my first Belton Brick in place on the Gravitation Reverb. I've seen the term "leaf socket" mentioned but not really sure what that socket is. Definitely sure that I don't have one on hand. Would prefer to solder straight to the board but want some feedback from some more...

Ha, great idea. On it.

Ok, thanks to both of you. I've had about a dozen successful builds but a couple of duds. I'll put these suggestions to use and see if I can sort them out.

Hey there, new to the forum. The Test Kitchen has some great tutorials which I've gotten a lot of good info from. But I was also hoping to find a tutorial on how to trace/troubleshoot a circuit from input to output with a MM. I may be overlooking just such a post but can someone direct me to...