Search results

Sorry for the somewhat inconsistent responses to the suggestions here! But I have had some success. As I suspected there seemed to be something wrong with the batch of 100k pots I had. I swapped those out and it immediately worked. Although then it was super noisy so I went and shortened the...

I spent some time on this with my oscilloscope and a test signal today. The faulty PF5102s came from ebay but the 2n5457s I've used to replace them seem to be working just fine. I actually think there's some mechanical problem with the A100k pots - if I jiggle the connections and shaft around...

I’m stumped! I’ve taken it out of its enclosure and it sounds the same.

I swapped both of the 5102s out for 2n5457s and the signal passes through fine. I have a couple other issues though: 1) The boost potentiometer only seems to work when it is not attached to the enclosure. I had to swap out one of the other pots because of the same problem. I can't see that...

Bingo, I swapped the first one out for a 2n5457 and the signal passes. I will see if I need to replace the second 5102 as well but I'm currently puzzling about what seems to be an intermittent mechanical problem with my filter pot...

I've built a Parentheses fuzz. None of the Distortion, Octave or Boost are working. I've started tracing the signal and it seems to stop at Q1. I've got my input signal at pin 3 and +9v at pin 1 but don't seem to be getting anything from pin 2 - should I be seeing an amplified version of the...

I have 3 spare footswitches with 6 pins each - would those work?

Damn! But yeah. I hear that.

I was overeager with my soldering, didn't look at the build guide closely, and soldered 3PDT breakout boards to all 3 of the footswitches for my Parentheses Fuzz (2019). Is it possible to hook these up somehow to the main PCB without desoldering them? I see that the center (octave) switch has...

Great! Cheers

Will I be able to power the Parentheses Fuzz using a 9 volt battery? I can’t see anything regarding its power requirements in the build doc. Thanks!