Search results

i cant really remember i think i mixed up those resistors r37 and r38 check all your resistors with the build docs

Thank you jwin615 for your help… as suspected the switch got roached from all of the de soldering I was doing so it was loud because it wasn’t clipping.. but I still didn’t 100% do what I wanted to do but next time I will have to use a breadboard.

I May just give up and use a different germanium diode with a different voltage with a different silicon diode. But I don’t want to do that I want a different two completely different clipping options. I put a 4.7 capacitor in there and it cranked up the bass … I think i need a good Prototype...

I used a resistor started at 10k then 36k then 100k 150k 220k and then 470k it didn’t change a thing I built this mosfet clipper and was using the gator clips putting the resistor to the ground on the switch maybe the switch is open due to the thousands of times I have soldered different cliping...

I did do that section a little differently the 47k is supposed to to connect right after the 100r then the 100uf and 100nf to ground..I’m not sure if it would matter.

It’s like the copper clad fuzz but I changed a few things so it’s brighter … I think I did the mosfet wrong I tied the Source and gate together and I have to look into that … I don’t think that’s right but it sounded good just loud… hahaha

Yes hard clipping to ground..i was thinking of putting a 10k resistor in series with one or two red leds. But I will put the 10k on the ground side I’d really like to use the one with a diode and mosfet sounded great… yeah I’m using a b100k pot of I did a 250 or 500k the. It would throw of the...

I put this pedal together and I’m trying lower the volume on the other side of the the switch I must have desoldered dozens of options I found a few other options besides a 1n914 and 1n34a… I like the sound of a 2n7000 with a D9e/1n34a … can someone check my sketch? I think it’s right… but it’s...

A+ on enclosure…. How was it done

I I switch both wires on the top 9 V jack and it works perfectly now … thanks for the help everyone!

The main 9v jack on the one like mine in the bottom picture doesn’t have the same looking power jack as the one above or the same looking jack as I have on mine maybe somebody put the wrong 2.1mm power jack on that one? Thank you for your help! Although I’m confused a little bit o did get it to...

I GOT IT TO WORK GUYS !!! I can’t believe it it only works if I use the 9v battery clip and no power supply… the main 2.1mm jack won’t work and I didn’t hook any other pedals around it… it’s a ok sounding pedal different then other fuzz faces I’ve played.. but I do prefer my choice silicone NpN...

Ok I’m sorry I get very confused whenever a pedal has this issue I built a supa fuzz one time that is a 9v center negative. But if I plug other pedals in around it the power supply cuts out. And it worked fine on it’s own… I’ve read about it a few times but it never seems to stick in my brain...

I bought this wren and cuff your face off eBay a long time ago… it says it was from an estate sale… I hate when people say that in a listing anyways I gots it pretty cheap.. it would need a voltage inverter to work I think the transistors are GS109 PNP?Any thoughts on how to wire a voltage...

Can you make a similar pcb for everyone to enjoy based off of the 2204 or a jcm900 would be great also with those clipping and selective cap values would be sweet.

I’m glad I found this post. I’m going to try this… the reason why I was going to post about doing something similar … I’ve never heard of the higher power pedal but I wanted a one switch jobber and possibly more gain options. The first time I built this pedal I put two 3M3 next to each other...

What’s the part number for the in and out and exp jacks on this build. I never use that style. I have seen them come in switched and I switched that gets confusing thats why I never bought that style jacks

I have made a bunch of these as well it hammers riffs like a jack hammer! It’s my favorite drive pedal. Definitely not a one trick pony it does rock and roll just fine. How did you do that enclosure it’s nice? What amp are you running it to… your clean tone sounds odd. And what guitar and...

I figured it just feels like more lower volume than normal maybe because there’s two sets of switches it’s twice as low… thanks for clarifying this for me Robert. I figured it’s normal just had to make sure I socketed One side of the GE DIODES so I may try a other set or put another set of si in...

I was just making sure i used two SPDT ON/OFF/ON was that what this schematic calls for? I know germanium diodes when used will have a little volume drop but when I have the switch all the way down on either side there’s a really big volume drop.. I was just wondering if that’s normal?