Search results

Thanks for all the tips! I’ll get back on the computer and clean up this design. In the meantime, I tried my first breadboard of this circuit and, after some tweaking with the power section of the circuit, got it working!

Row T is ground

Hello, Very first time trying a stripboard layout and I thought I'd start with the Snuffy Fuzz. Does this look accurate? https://docs.pedalpcb.com/project/Snuffy-PedalPCB.pdf Thank you!

https://aionfx.com/project/artemis-preamp-drive-mk-i/ I just built this and gain doesn’t seem to be working. The volume bass and treble pots seem to be doing their job, but turning the gain knob causes no change in volume until the very very last bit of travel. Plus, there’s breakup all the...

Thanks, All. It lives! I ended up checking the resistance on each end of transformer, it was good. I then reconnected the hot wires and got 19ish volts coming out of it and figured i’d give it a whirl. I was able to get a faint sound out of one side of it. Still not sure how to make use of all...

Thank you! Starting off, no schematic - I think it’s all in his head. Visual inspection - see picture of the transformer(?). Power comes in from wall, one wire goes into the transformer and the other goes into the glass tube (fuse?!). Then the white/red wire comes out the same side and he’s...

Im very new to the world of electronics and pedal building. However, I’ve recently been given a DIY signal generator from a friend and I’d like to 1) get it working and 2) use it for signal tracing and diagnostics. I already made a probe and am using a phone app for a signal, but I think it...

Hi! On my normal board I have a Tech 21 VT bass. Always on, sounds great, but I’d like to try and build something for a smaller board that has some tone shaping but all the tube style warmth and compression of that pedal. I don’t need to use the character knob function, so are there any Ampeg...

Thank you, I ended up doing both in series like a teepee as suggested (10+2 and a 5.1+22). I then measured with my meter (which is an old analog one from Sears that used by be my grandpas) and it seemed to get me there in both instances.

Thank you so so much! I’m going to series the 12k, put in a 22k, and order a 220n film cap.

Well shoot. One more. R10 calls for a 27K - I have a 33k and a 22k, which one?

Hi guys, first time pedal pcb builder and forum poster - I’m starting with a woodpecker tremolo. R3 calls for a 12K resistor and all I have are 10s and 15s. Which one should I use? Does it really matter in this instance? Why/why not? The only other part I’m missing is c5. It’s a 220n...