Search results

Yes, the three LEDs were backwards. Somehow I had all three backward, despite triple checking the meaning of the square pad vs round pad, A vs K, and still writing it out correctly on the initial post. :oops: Good news is, I got everything switched around and the effect works. Thanks all!

No dice on that :confused: I checked everything for continuity, no shorts.

Photos found here.

Hi all. I ordered and built a Sproing Deluxe PCB - after emailing to ask for a bill of materials and being advised that all values were printed on the board. Great! I built it up, and the reverb side of the pedal does work - but only one knob, the "Reverb" knob by looking at the faceplate. The...

I'm very happy with it! It sounds great :)

Traces, cuts, bridges all ok. That resistor WAS only a 47 - so swapping it out fixed it. Very excited, this thing sounds sweet! Now to clean up the wiring and box it in, thanks all :)

We have sound! Now a different problem: there is high pitched feedback. The tone of the feedback decreases when the gain nob is increased. The level of the feedback is pretty intense. Increasing the value of C3 does cut the squeal somewhat (I tried 1n), but what I don't understand is why the...

Good catch I've been over this thing fifty times and didn't see that. Heating up the solder iron now

Verified layout from dirtboxlayouts

Bypass sounds fine, no sound with pedal engaged. Even with the amp turned up you can't hear anything (including pot sweeps).

Hi all, Working from this layout of the Precipice schematic. The only part substitution I used was a 1N4001 in the rectifier spot instead of the 5817. I've tested between all the vero rows for shorts, double checked component placement and trace cuts, and I'm stumped. IC voltages are 1:7.39v...