Search results

Thanks boss!

Are there Build Docs/Drill template for the Pot and Kettle? I bought it when it was on sale, so if there's been an update since then, I'd need the older build docs. Thanks!

One of the admins replied in another post I made in the Missing docs thread: https://docs.pedalpcb.com/project/drill/125B-DrillTemplate_ADHD.pdf

Thanks!

Idk if the new ADHD is on the list/requested, but I put all the PCBs together a month ago and don’t want to screw up when drilling the enclosure. Thanks in advance!

Just wondering if anyone has built the new ADHD board and successfully drilled an enclosure for it? I’ve looked through the site for PCBs with similar layouts, to try and use those for drilling, but never found anything with the toggle in the right spot. If anyone has had success with another...

Sorry to chime in after it's been solved, but where did you get all of the parts for the bulb and the four things surrounding it? I have this about 90% of the way populated, I'm missing those and the pots, cause I was going to wait until I got the parts in the middle.

I don't know if you've fixed this by now, but I usually bend the pots forward to give me more room to desolder when this happens.

I've been thinking of doing something like this, how would one wire it up to the PCB?

I've built a few Kliches and the one I put D9K's in is by far my favorite. Next favorite is D9E, then the last one is with cheap 1N34A's i found on amazon 😂 surprised they worked.

I bought one of these, and it didn't fit the 3PDT switches I have, did you have to have a certain switch for it?

Thanks!

I saw K pedals does that and I've done it on all my pedals where the pcb is close enough to the footswitch to allow it.

I've been thinking about doing this for a while, but my question is would each PCB need its own power, or could they both run off of one power jack/source? I'll be using a 1590XX, so there will be plenty of room, but don't want to mess either one up by not providing enough power.

You might be better off with the 1590XX, that's equal to two 125Bs side by side.

Yeah sorry I've been busy with work and family stuff leading up to the holidays, so I finally got a chance to work on it yesterday

It was 0.3, so I swapped it out with a J201 and unity volume is where it should be at noon. Thanks for all your help!!

Oops, I thought you meant one of the legs of the transistor was ground, sorry about that. I am pretty new, but I should've known what you meant by ground. My bad!

What is ground?

I have the same bits, but I bought a bench top drill press. I had a heck of a time doing the drilling for the 6 band EQ.