Search results

This makes my cheap @$$ feel better on splurging on a sparkly enclosure, then, ha! Wanted to give it a proper home and all.

Came across this flanger when looking for stomplfo projects outside of what's available over at Eletric Druid. Chuck Bones graciously sent me a pcb and odds and ends to get thisbsucker up and running. Build wise, I ran into a little bit of an issue with the pcb mounted pots. I guess I drilled...

I used the largest step bit in the three pack you get from harbor freight and was able to drill the bottom lid thin enough without going through to make the bulb fit. fit. I wet the top of the bulb and carefully put the lid on and was able to mark the spot that way.

The red is red sand texture. Both are sunnyscopa laser waterslide (white not cleear) clearcoated with rustoleum semigloss. Kinkos is the jam. I usually do several pages at a time since they started the $4 minimum service fee. Still totally worth it.

I tell ya what gets me is the brown and red in low light. 1k/10k.... My bad. I usually will dabble with your mods and thought this might be a good place to ask about how the gain is. Didn't realize ROG had a separate sound sample page. I got it sorted. Anyway, didn't mean to derail your...

Can anyone comment on the amount of gain this one has into a clean amp? I am getting plenty of bright and sparkly but only overdriven when gain dimed. All the jfets bias up right. Audio probing at the gain pot reveals a less than unity signal. Should it be boosted at this point?

Looks awesome, man! I've got the Percolator on NY short list and am interested to see what you think (original vs Albuni) once used through some amps. How was the graphic done? UV, waterslide?

Unfortunately, also gives me the Cleveland Browns vibe. They've had my Bengals # for the last several games. Thanks! Yeah, I need to grab some ones that are the size of the lock washer that come with them. I have some from (b)LMS that I usually go with (yes, I am an anti whitw washer guy,) but...

Finally got around to this one. Over at MBP years ago, Alanp made some layouts for lovetone projects (Rissole (meatball) was one of my faves This one was a clone of the lovetone cheese source. While the cheese lived up to its rep, there was something not quite right about the brown source...

Yeah, what he said!

Very cool! Out of curiosity what type of adhesive are you using for the materials?

Woops! I'll get that edited quickly. Good catch!!

A fairly easy build. Biased the jfets around 4.65 with the trims. The high control gets nasty when cranked along with the gain. Like that harsh octave clang kind of texture. I thought it might be a mishap on my part but I verified the same behavior through a bedroom videos youtube vid. Kind of a...

Looks great!. Not sure if you read in the build notes or not but you can mismatch the v3207 and a mn3208 to get even more modulation madness. I think I read where one modulates at a higher octave. I haven't had the chance to switch back and forth on a stereo rig to determine whether it is...

Graphics can be such a pain especially when you use the clear waterside and can't just cover it up. I had one recently that had a blemish and decided to go distressed look. Lemonade outta lemons! Looks like you nade yours work, regardless! I wasn't crazy about this graphic. I usually try to pay...

I always dug the Pitch Pirate demos a bit more than it's cousin, the Clarinot, so finally got around to building one up. Nothing too crazy going on here build wise. I read on here at some point that the lcr0203 worked fine and I would agree. From my recollection of pt2399 delay (Deep Blue?) you...

Regarding the LED I remember Brian posting this over at FSB: the f@ck is 3 jfet (2 j201, 1 2n5457) gain stages in series with the dual pot (gain) controlling the volume of the first 2. final 2n5089 is an emitter follower. SWTC for the high-cut control. the rest of the components are for an...

Looks great man! Been contemplating building one with low gain transistors more like the original superfuzz....maybe it wont matter? Killer band, too. (Kowloon Walled City.)

So usually I use audio out from my computer in to pedal out to practice amp to test stuff out. It seems a combination of a shoddy ground patch cord in that loop and then noise from single coil guitar when I switch ed to it, kept the gate open. Switched to humbucker and no problem. No tick in sub...