Search results

I just build one of this ones and I notice that when the pedal is engaged the volumen decreased substantially. I try to ply with the trim pot but either bypass the effect or I get the decrease in volumen . Is this normal??? And if it is there is anyway to correct it ? Thx

Thx so much

Im building a sabbath pedal. In the capacitor list don’t say if they need to be . Film, monolithic , ceramic, electrolytic. Is that matter or I can use what ever I have available. Thx

2 spots to the left on the PCB totally my mistake. It throw me off a bit . I’m still new and learning about this stuff . Thx for all your guidance

Yeah what confuse Me, was it say 47P .

Ah ok so is 47ohms not 47K ? Right ?

In the reference page on R5 it show under resistor “47” now on the PCB board say in R5 47p. Is that a regular 47K resistor? Thanks

In the reference page on R5 it show under resistor “47” now on the PCB board say in R5 47p. Is that a regular 47K resistor?

Yes

One is going to the Board the other to the 9v and the other to ground

I just buy some TRANSISTOR SOCKET . I will install those and try different transistors

Yeah I have a batterie snap . The voltage into the PCB is 9.51V

The same

The colector In the Q2 is 0.274V

I see that the emitter in Q1 reads Zero

Yeah my LED function normally

Ten trimm pots ? They are in the middle

Q1 are E=0 / B=0.241V / C=0.843V Q2 Are E=0.244V / B=0.843V / C= 0.274V The 33K=8.43V The 1K =0.0V The power input = 9.51V

Ok this is correct .