apierz
Active member
Here is a UV printing PDF for the AionFX Prism. The graphics are meant to ape the Boss FA-1 that the pedal takes its inspiration from. It has color and RDG_WHITE, but no gloss. The closest knobs that are easily available are 19mm diameter Davies 1510 style knobs, so that's what the control indicators are sized for.
It looks good on Tayda's sand texture green enclosure. There might be some other greens that look closer to the original, but green sand seemed very close to me and was one of the few greens Tayda had in stock at the time. I'd be interested to see it on some of the other ones. The drill template moves the footswitch and LED up towards the middle of the pedal to account for the graphics (the original is not a pedal so it has no foot swtich), which might make the installing the footswitch and breakout board a little tricker than normal for an Aion pedal. As always, resize the LED hole per your preferences.
PDF:Link
Drill template: Link
It looks good on Tayda's sand texture green enclosure. There might be some other greens that look closer to the original, but green sand seemed very close to me and was one of the few greens Tayda had in stock at the time. I'd be interested to see it on some of the other ones. The drill template moves the footswitch and LED up towards the middle of the pedal to account for the graphics (the original is not a pedal so it has no foot swtich), which might make the installing the footswitch and breakout board a little tricker than normal for an Aion pedal. As always, resize the LED hole per your preferences.
PDF:Link
Drill template: Link
