Adding LFO LED to the XC Phase?

SweetBerryWine

SweetBerryWine

New member
Hi all,

I'm looking to add a LFO LED to the XC Phase. Would this be possible? I wanted to do an bright white or UV LED. My sister-in-law painted this enclosure for me. It would be a shame not to have Navi glowing with the rate...

1000015684.jpg
20240721_101928~2.jpg 1000015696.jpg
 
Resurrecting this old thread because I was curious of this myself. I found this thread https://www.diystompboxes.com/smfforum/index.php?topic=110664.0 and it has this neat pic that I believe has been verified.
Phase 90 LFO LED.gif

This appears to be the spot on the PPCB XC Phase going inbetween the negative of C8 and pin 6 of IC3
1744828682411.png
1744828699791.png

I could totally be wrong, but would anyone care to double check me? I'm going to be building one soon so I can try then.
 
this method will work but it's taking the square wave output of the op amp so the LED will only blink in time with the rate, it will not swell or throb or ramp the way the LFO's triangle wave output does
 
i posted about a circuit that will work and will throb with the LFO shape and not just blink, on this thread. chuck replied that if he had to add a second op amp anyway then he'd just build a CE-2 style 2-op-amp triangle wave LFO which can drive an LED just as-is. if you don't want to build a completely different LFO but rather just add a little bit to the existing one, try out what i posted.
there might be a better way to deal with the bias voltage that i was playing around with but i haven't quite figured it out yet.
 
I ended up building it with a buffer just to error on the safe side. I couldn't figure out how to make it gradually pulse so it just goes hard on/off but I'm happy with it.
 
You must log in or register to reply here.
Back
Top