aion fx i/o board

[Audandash]

Hey guys. If you are in this forum I am sure you are quite capable of making this board yourself. I just thought I would share since it could be useful to someone. I have built several of the aionfx projects and my biggest complaint is the foot switch board. It seems to be a common thing but it is what it is. I decided to use my I/O boards with the projects to make them look neater but of course they can't use a normal pinout. lol. So I went in and made some I/O boards specific to Aion. it is just a very simple board. It has the stereo jacks from tayda and the power jack from tayda. The great thing about these is you can finish your project with a clean look. I use the 6 pin ribbon cable from Stompbox Parts to keep it tidy. I will attach the pcbway shared project link if you want to get them. I would just post it here but I can't upload a zip file. If you prefer just dm me and I can email it to you.I took off my logo so they will just have the components on them. links to the parts are below and a generic aionfx 3 knob drill template so you can see the coordinates and drill sizes.


https://www.taydaelectronics.com/ha...female-connector-thread-lock-panel-mount.html

https://stompboxparts.com/cables-wire-plugs/ribbon-cable-6-pin-4/

https://www.taydaelectronics.com/dc-power-jack-2-1mm-barrel-type-pcb-mount.html

https://drill.taydakits.com/box-designs/new?public_key=UnBpT0Mrd2R1c3dtNE16K1cxN3h5UT09Cg==

 

[southpaw-dd]

Really appreciate this as I've been wanting to use something like this on Aion builds. I'd love to get the pcbway share or zip file.

 

[Audandash]

The share link isn’t opening properly. I will just dm it to you.