- Build Rating
- 5.00 star(s)
What started as an interest in the Clever Hans evolved into an @Aleph Null inspired pedal board project and it rips!
Peacock Fuzz - Two fuzzes in Parallel in one box - who doesn’t want that?
Clever Hans - Gnarly, Gated, Dead Quiet - its a monster!
Otolith - This one is a sleeper - Its got range but stays within in its element.
Special Sauce - Does a nice Chorus but the doubling and slapback on this are where the money is.
Tape Delay MK II - Totally Cosmic
The PCBs and build docs are well thought out. Maximum Respect to Mr. Null for his expansion on the ideas in these circuits and creativity. My builds here are janky but they work and the results are full of mojo.
I built these stock or as close as i could. @Aleph Null has build reports and demos for all his stuff. His demos are accurate but boy do these cook on another level through an old tube amp.
Also - the parts!!! - its all common stock parts!! I had a lot of what needed in my hoard of left overs and was able to get the balance domestically (no tariffs or exchange rates). The real mojo comes from non-mojo parts.
@Aleph Null - Thank you, Maximum Respect!
@Robert - Thanks for enabling the community - I buy your stuff too and will again soon.
Dear Build Reporters - I scour your posts and couldn’t do my projects without referencing yours. Thank you,
Cheers y’all
PS there is a room for Weeble here and an empty 18v port in the power supply under left over kitchen drawer facing i used for the board. And i have one on my bench.
Peacock Fuzz - Two fuzzes in Parallel in one box - who doesn’t want that?
Clever Hans - Gnarly, Gated, Dead Quiet - its a monster!
Otolith - This one is a sleeper - Its got range but stays within in its element.
Special Sauce - Does a nice Chorus but the doubling and slapback on this are where the money is.
Tape Delay MK II - Totally Cosmic
The PCBs and build docs are well thought out. Maximum Respect to Mr. Null for his expansion on the ideas in these circuits and creativity. My builds here are janky but they work and the results are full of mojo.
I built these stock or as close as i could. @Aleph Null has build reports and demos for all his stuff. His demos are accurate but boy do these cook on another level through an old tube amp.
Also - the parts!!! - its all common stock parts!! I had a lot of what needed in my hoard of left overs and was able to get the balance domestically (no tariffs or exchange rates). The real mojo comes from non-mojo parts.
@Aleph Null - Thank you, Maximum Respect!
@Robert - Thanks for enabling the community - I buy your stuff too and will again soon.
Dear Build Reporters - I scour your posts and couldn’t do my projects without referencing yours. Thank you,
Cheers y’all
PS there is a room for Weeble here and an empty 18v port in the power supply under left over kitchen drawer facing i used for the board. And i have one on my bench.
Attachments
-
IMG_2757.jpeg1,007.1 KB · Views: 22 -
IMG_2754.jpeg1 MB · Views: 20 -
IMG_2752.jpeg713.4 KB · Views: 13 -
IMG_2749.jpeg774.6 KB · Views: 11 -
IMG_2751.jpeg776 KB · Views: 12 -
IMG_2747.jpeg722.2 KB · Views: 14 -
IMG_2748.jpeg782.5 KB · Views: 16 -
IMG_2742.jpeg888.8 KB · Views: 17 -
IMG_2668.jpeg835.5 KB · Views: 15 -
IMG_2599.jpeg939.3 KB · Views: 13 -
IMG_2664.jpeg832.7 KB · Views: 12 -
IMG_2671.jpeg728.6 KB · Views: 20