pbrommer
Well-known member
- Build Rating
It Weebles! It Wobbles! I’m sure I’ll knock it over.
5/5 board and project from AlephNull. Simple board layout, easy to follow instructions. Now, I made it harder by stuffing it in a 1590B. Everything is offboard wired, so not as easy - use a 125B if you want all the pots and switches mounted on the board.
3.75/5 for the maker because I couldn’t desolder a few parts and lifted a couple pads. Oh well, still sounds great. Might try to get some sounds with my crappy playing to show what it sounds like at 9V.
I reused an old 1590B and used Angelus Leathers purple acrylic paint. A bit thicker than most and brushes on smooth. Going to keep it simple. Not sure what knobs yet - probably smaller due to the two potentiometers kind of squished closer than usual.
5/5 board and project from AlephNull. Simple board layout, easy to follow instructions. Now, I made it harder by stuffing it in a 1590B. Everything is offboard wired, so not as easy - use a 125B if you want all the pots and switches mounted on the board.
3.75/5 for the maker because I couldn’t desolder a few parts and lifted a couple pads. Oh well, still sounds great. Might try to get some sounds with my crappy playing to show what it sounds like at 9V.
I reused an old 1590B and used Angelus Leathers purple acrylic paint. A bit thicker than most and brushes on smooth. Going to keep it simple. Not sure what knobs yet - probably smaller due to the two potentiometers kind of squished closer than usual.
