tegendemuur
Well-known member
Sunday morning puzzle. The different resistor and cap values, marked. So you don't have too.
The addition in the center of the BF-2B was explained on the Bean boards... "The R65/C41 is not special to the HF-2 overall, just an improvement to reduce noise. You might explore adding it in on tagboard (if possible) and see what difference it makes. It might be a good mod to build into a BF-2."
Prints come from this service manual: https://manuals.plus/m/4c753f811e6649981fe4dc560e21bda12003e23f0be79ca3ab77aad4046ce499.pdf
Fraudhacker. Going to have to go through this one to see if that noise bit was implemented, but I am not fluent in schematic.
The addition in the center of the BF-2B was explained on the Bean boards... "The R65/C41 is not special to the HF-2 overall, just an improvement to reduce noise. You might explore adding it in on tagboard (if possible) and see what difference it makes. It might be a good mod to build into a BF-2."
Prints come from this service manual: https://manuals.plus/m/4c753f811e6649981fe4dc560e21bda12003e23f0be79ca3ab77aad4046ce499.pdf
Fraudhacker. Going to have to go through this one to see if that noise bit was implemented, but I am not fluent in schematic.
Last edited: