Byzantium Flanger 25k bias trimpot.

Teddeeh

Teddeeh

Member
hello yall. im making this and im finding it a wee bit tricky to get a 25k bias trimpot. on the bf2 scheme it uses a 22k bias trimpot.
am i gonna get away wirth either a 20k or 50 trimpot? i could proberly make a psuedo 25k trimpot with a 50k resistor along the legs (1-3)
what do y'all reckon?
 
Teddeeh said:
hello yall. im making this and im finding it a wee bit tricky to get a 25k bias trimpot. on the bf2 scheme it uses a 22k bias trimpot.
am i gonna get away wirth either a 20k or 50 trimpot? i could proberly make a psuedo 25k trimpot with a 50k resistor along the legs (1-3)
what do y'all reckon?
Click to expand...
Can't find the schematic, but if you can make out the traces for the trimpots and they're set like rheostats instead full-on potentiometers, then yes, you can use a 25K trimpot. The 22K trimmer in the BF-2 schematic is for setting the bias and is set up like voltage dividing pot - not a rheostat.

Good luck!
 
  • Like
Reactions: fig
Where are you located? Here are some possibles...


3362P-1-223LF Bourns Inc. | Potentiometers, Variable Resistors | DigiKey

Order today, ships today. 3362P-1-223LF – 22 kOhms 0.5W, 1/2W PC Pins Through Hole Trimmer Potentiometer Cermet 1.0 Turn Top Adjustment from Bourns Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com www.digikey.com

If you happen to need 99 more...

 
You must log in or register to reply here.
Back
Top