Fuzzonaut
Well-known member
To round off my recent DEFX trilogy, here comes the BLUR, a clone of the Adenture Audio Fuzz Peaks II.
It's a Muff at heart, with a clean blend, 2 clipping options, Mids on a 3-way toggle and a feedback loop on a momentary footswitch (Peak).
I replaced the resistor (R31) that defines the range of the BIAS knob with a trimpot. (BIAS is on Q4).
Currently there are 4x BC574B in there, as suggested. I might try other transistors one of these days.
Very cool circuit, I just wish the clean signal would be louder, maybe my fault? I'm not smart enough to figure out (for certain) how I could get more clean volume ... but, it's not really a problem, my clean bass signal has it's own stack anyway.
LP Cover for graphics.
It's a Muff at heart, with a clean blend, 2 clipping options, Mids on a 3-way toggle and a feedback loop on a momentary footswitch (Peak).
I replaced the resistor (R31) that defines the range of the BIAS knob with a trimpot. (BIAS is on Q4).
Currently there are 4x BC574B in there, as suggested. I might try other transistors one of these days.
Very cool circuit, I just wish the clean signal would be louder, maybe my fault? I'm not smart enough to figure out (for certain) how I could get more clean volume ... but, it's not really a problem, my clean bass signal has it's own stack anyway.
LP Cover for graphics.
![peaks.jpeg peaks.jpeg](https://forum.pedalpcb.com/data/attachments/79/79936-8b44ff55a74e0ea0a534d8b073a7dea2.jpg)
![peaks-g.jpeg peaks-g.jpeg](https://forum.pedalpcb.com/data/attachments/79/79937-44d5d75dac3466d356e15ed0fa16bb68.jpg)