REQUEST DEFX Drill Templates?

leadfoot

leadfoot

Well-known member
Over in the builds section, it was mentioned we needed a thread for DeadEnd FX project build templates. So, who has some Tayda Drill Templates they are willing to share for their projects?

I've got a few of the Last Gasp Arts Labs PCBs that I'll be building soon, so if anyone has some templates for those, I'm all ears! Thanks!
edit: added links to the drill template posts and I'll keep this updated as more Dead End FX templates are added.
 
Last edited:
Following, placed an order for several items yesterday, and oh my.. gonna be switches galore!

Not as worried RE: Flange and Mangel, but that PLL and String Ringer are loaded up.

1773245441924.png
 
I built the mangel wurzel and it’s awesome. I don't think it will fit in anything that tayda offers though. They have a bb2 and it’s about 5mm shorter than the bbs. The jacks would be way too tight. I had an old 125bb which is similar to the bbs and it barely fits. If you search mangul wurzel you will see my build report and pics.
 
Last edited:
Audandash said:
I built the mangel wurzel and it’s awesome. I don't think it will fit in anything that tayda offers though. They have a bb2 and it’s about 5mm shorter than the bbs. The jacks would be way too tight. I had an old 125bb which is similar to the bbs and it barely fits. If you search mangul wurzel you will see my build report and pics.
Click to expand...
Shame they do not offer the 1550 series enclosures!!
 
I will try and get you a drill template for the string ringer. It looks like tayda offers drilling service for the 1590d. That’s the first time I have noticed it. It may take me a little longer as I don’t have anything set up for that box yet. Do you have the physical board? Since I don’t have the board in hand I generally like to take a few measurements off the deadendfx drill template and verify with real measurements just to be safe. It only takes a few to verify it’s to scale. I will say I won’t do the jacks though. Deadendfx doesn’t give jacks on their template and it can be too much of a guessing game so you will need to either hand drill them or make your best guess on the template.
 
Audandash said:
I will try and get you a drill template for the string ringer. It looks like tayda offers drilling service for the 1590d. That’s the first time I have noticed it. It may take me a little longer as I don’t have anything set up for that box yet. Do you have the physical board? Since I don’t have the board in hand I generally like to take a few measurements off the deadendfx drill template and verify with real measurements just to be safe. It only takes a few to verify it’s to scale. I will say I won’t do the jacks though. Deadendfx doesn’t give jacks on their template and it can be too much of a guessing game so you will need to either hand drill them or make your best guess on the template.
Click to expand...
The boards *SHOULD* arrive Thursday, 19 March. I can take measurements at that time
 
You must log in or register to reply here.
Back
Top