Dizzy Elk build doc/schematic

[peccary]

I wasn't quite sure where to post this, so to The Breakroom it is.

I have sent out quite a few Dizzy Elk boards to people and I just wanted to put the build docs online in case I forgot to send them to anyone.

You can also find the schematic here as well if you're into that sort of thing:

Dizzy Elk Build Doc.pdf

drive.google.com

 

[jwin615]

Not sure where to post this either. Someone want to check my work?
Transistors aside, this, I believe is the BOM transfered to Gnat.
Invert or don't on D1, depending on phase inversions and personal preference.

 

[peccary]

Not sure where to post this either. Someone want to check my work?
Transistors aside, this, I believe is the BOM transfered to Gnat.
Invert or don't on D1, depending on phase inversions and personal preference.
View attachment 60733

Here's the best place to check that you're all good. All of my values were taken from the image in the first post there, which was provided by @music6000

PedalPCB Gnat mod - "The Dizzy Elk"

First off: all credit for this goes to @music6000 , @thewintersoldier and everyone else who contributed to this build. You can see the original discussion here. All I did was follow their advice. This mod allows you to use the Gnat Fuzz PCB to create an NPN Elka Dizzy Tone. I wanted to share...

forum.pedalpcb.com