Dumbloid Twin build

C

cniers13

Active member
dumbloid twin.jpg

Hello all! I have two Special overdrives built but I am wondering how I can build them to mimic the shins dumbloid twin. I would like to have one footswitch turn the pedal on and then the other select between either ch1/ch2 as seen in the photo.

Also, would a 1590bb be sufficient to make the enclosure similar to the photo with each channel running horizontally? I have knobs that size and would like them to look similar to the photo. Thanks, guys and gals!
 
If you use two boards meant for 1590N1 (125B) then you'll need a 1590XX.
If you've got two boards meant for 1590B, you might be able to squeeze 1590BB. For that many knobs and switches, I'd just go 1590XX, even though I try to make everything as compact as possible.
 
cniers13 said:
View attachment 24487

Hello all! I have two Special overdrives built but I am wondering how I can build them to mimic the shins dumbloid twin. I would like to have one footswitch turn the pedal on and then the other select between either ch1/ch2 as seen in the photo.

Also, would a 1590bb be sufficient to make the enclosure similar to the photo with each channel running horizontally? I have knobs that size and would like them to look similar to the photo. Thanks, guys and gals!
Click to expand...
Are you running the pots the same direction as the shin with wires off the PCB Board?
 
You must log in or register to reply here.
Back
Top