DWARVEN HAMMER

[HBC]

I have trouble with this latest version of dwarves hammer no distortion coming out of pedal - I know it's probably me but asking for advice , made a second one on a bread board still no distortion ? voltage ref and input voltage 5vdc and 9 vdc wasn't sure ??? schematic hard to understand on site pics are of another pedal ?

 

[Paradox916]

Tayda, stompbox parts, digikey, mouser (they probably still have the 4558DD if you wanted to go all out)

 

[HBC]

Tayda, stompbox parts, digikey, mouser (they probably still have the 4558DD if you wanted to go all out)

THANKS AGAIN ! I will let you know if I succeeded.

 

[andrewsrea]

Given the description, I agree with HBC's diagnosis. Sounds like a common component. Check to see if the decade switch is functioning as designed.

 

[HBC]

THANKS AGAIN ! I will let you know if I succeeded.

TRIED A SIGNAL PROBE - touched 4.7k both sides I got sound - touch k of led and got sound .???? that's power side only ??help please

 

[Paradox916]

TRIED A SIGNAL PROBE - touched 4.7k both sides I got sound - touch k of led and got sound .???? that's power side only ??help

If that’s the case you probably borked the off board wiring, like I said before, clean up the wiring, and check the board for solder bridges, if it’s a bridge it’s most likely at the bottom 4 pads that connect to the switch.