Synchrony Pedalworks
Well-known member
I cannot claim the idea of a dual equalizer. My plan is to set one side ready for my single coil and the second side for my humbuckers. I can also set one side as a boost.
I added a simple Jfet buffer and used a handy utility board for the power wiring. These add on boards were great. For the Jfet buffer, I used a tantalum capacitor for the 10 uV MLCC. The positive lead is pointed towards the J201.
My learning point is to have Tayda drill these big boxes with multiple holes, and to double check the labels. Hi Boost, should be hi-cut freq.
. Well, at least this is a pedal for me!
I added a simple Jfet buffer and used a handy utility board for the power wiring. These add on boards were great. For the Jfet buffer, I used a tantalum capacitor for the 10 uV MLCC. The positive lead is pointed towards the J201.
My learning point is to have Tayda drill these big boxes with multiple holes, and to double check the labels. Hi Boost, should be hi-cut freq.
. Well, at least this is a pedal for me!
Last edited:
