drgonzo1969
Well-known member
Alright, this one is a real headache. There is no list of reference designators with values. Just an image of the PCB with values on it. So in the top left corner of the PCB there are 4 components labeled F1, F2, F3, and F4. The image with values says 10ohm but the footprint is larger than the resistor footprint. The BOM only lists two 10ohm resistors. My question is are they 10ohm resistors? Maybe higher wattage since the footprint is larger? My initial thought was ferrite beads. I asked AI and it confidently told me they were connection to the filter controls for the faceplate. I told it that was probably wrong and then it agreed with me and told me they were fuses. I don't see any normal sized 10ohm resistor footprints anywhere on the PCB but I easily could have missed it. This thing is dense and the build docs suck. Here are links below to BOM and reference images. Thanks in advance for taking a look. This one is gonna take me ages to finish hahaha.
