Hello folks!
This is my very first pedal and I've tried really hard to troubleshoot this myself without looking to this forum for help but I'm at a loss with my lack of knowledge and experience.
I decided to try my hand at building the VHS. This would be my first time soldering, reading schematics, all of the above.
I do have signal coming through the pedal which called for a little celebration. Gotta celebrate the little wins. But none of the effects seem to work.
I've reflowed all my solders, changed out a pot that I thought was dead. Rewired the footswitch. (Yes it looked worse than that) Cleaned the flux from the board with 70% iso then 99% iso. Still not sure what could be the issue. The last thing I'm going to try is to swap the 24LC32A. I didn't put the one in that came with the board because I had one from Tayda.
Anywho maybe someone sees something here that could be the issue.
This is my very first pedal and I've tried really hard to troubleshoot this myself without looking to this forum for help but I'm at a loss with my lack of knowledge and experience.
I decided to try my hand at building the VHS. This would be my first time soldering, reading schematics, all of the above.
I do have signal coming through the pedal which called for a little celebration. Gotta celebrate the little wins. But none of the effects seem to work.
I've reflowed all my solders, changed out a pot that I thought was dead. Rewired the footswitch. (Yes it looked worse than that) Cleaned the flux from the board with 70% iso then 99% iso. Still not sure what could be the issue. The last thing I'm going to try is to swap the 24LC32A. I didn't put the one in that came with the board because I had one from Tayda.
Anywho maybe someone sees something here that could be the issue.