Intelligent Relay Bypass Channel Switching Mode

[himers1990]

I bought two Intelligent Relay Bypass pcbs and wanted to check the modes, but the Build Documentation doesn't give detailed instructions on how to set each mode...
I especially want to use it in Channel Switching Mode, so does anyone know how to set it up?

 

[Kipnugget]

According to the manual: "Holding down the footswitch while applying power cycles to the next mode.". Which mode you are in you'll have to discover by testing the behaviour of the switch.

 

[himers1990]

According to the manual: "Holding down the footswitch while applying power cycles to the next mode.". Which mode you are in you'll have to discover by testing the behaviour of the switch.

Thank you for the advice. I'll give it a try.

 

[Robert]

For channel switching mode you'll also need to connect the two modules together by running a wire from either CTRL pad of one to either CTRL pad of the other.