Kliche Mini Special Edition knobs

[jhaneyzz]

I haven't quite finished the board, but before I etch the enclosure, are these labeled properly?

 

[owlexifry]

if my understanding is correct it should be:

(from top to bottom/left to right) --> GAIN, TREB, LEVEL

 

[jhaneyzz]

Yep... I totally screwed it up...

Thanks for the confirmation.

 

[owlexifry]

Yep... I totally screwed it up...

Thanks for the confirmation.

well, im yet to even have a go at doing any computer-generated graphics for UV prints, so you're still well ahead of me hahah

 

[jhaneyzz]

well, im yet to even have a go at doing any computer-generated graphics for UV prints, so you're still well ahead of me hahah

The funny part is, I posted this question then just kinda forgot I did and etched the thing with all three knobs mis-labelled. I spent an hour troubleshooting why the "volume" pot wasn't working properly.... probably because it was the Gain knob...

 

[jhaneyzz]

I came up with an "Electrical" solution to the problem...

 

[Harry Klippton]

The funny part is, I posted this question then just kinda forgot I did and etched the thing with all three knobs mis-labelled. I spent an hour troubleshooting why the "volume" pot wasn't working properly.... probably because it was the Gain knob...

I'm laughing because I would do this

 

[jhaneyzz]

I'm actually kinda thinking of putting some thin metal plates in place of the tape and pop riveting them in place...

 

[JPK1]

I'm actually kinda thinking of putting some thin metal plates in place of the tape and pop riveting them in place...

You could try these pre-made labels I found when looking for a way to label my Kliche controls. Just beware that when he sent mine USPS he tried to save money by bypassing the Priority mail cost, and the local USPS wanted to stick me with the additional cost of like $6.50. I think most post offices don't catch it but mine does. I just returned it and ordered custom-made black vinyl. And then the same thing happened with the USPS, but this time the vendor agreed to refund me for the additional (he did). Many of these vendors are doing this on these small packages. This is like the 4th time it's happened. They are passing the savings on though. The shipping on these pre-printed is only like $4. Priority mail is like $10+.


Note that there's no volume, but there is a "LEVEL". I actually used LEVEL on my custom-made ones. I also used GAIN and TONE on my custom ones. See below.

Stompbox Labels for DIY Guitar Pedals

Stompbox & Guitar effect pedal labels from Sticker.com. We carry a full line of labels and stickers. We also offer custom labels to fit all of your needs.

www.sticker.com

.