I finished an Eternal Burst and found the Level and drive difficult to dial in compared to other pedals.
First the Drive Knob seemed maxed out and not do much after about 11 O'clock. So I swapped the standard B500k pot to a A500k pot. That fixed that issue.
Second was the Level. Unity was at about 4 O'clock and was so hard to dial in, as the smallest of adjustment made a huge difference. So we swapped out the standard A500k for a B500k (I swapped it with the drive pot). This helped heaps but unity was still around 3 o'clock. So I used a C500k pot. Now it's perfect with unity at noon and a much easier adjustment across the range of both knobs.
I hope this helps someone out.
First the Drive Knob seemed maxed out and not do much after about 11 O'clock. So I swapped the standard B500k pot to a A500k pot. That fixed that issue.
Second was the Level. Unity was at about 4 O'clock and was so hard to dial in, as the smallest of adjustment made a huge difference. So we swapped out the standard A500k for a B500k (I swapped it with the drive pot). This helped heaps but unity was still around 3 o'clock. So I used a C500k pot. Now it's perfect with unity at noon and a much easier adjustment across the range of both knobs.
I hope this helps someone out.
Last edited: