mybud
Well-known member
- Build Rating
- 4.00 star(s)
Hi all: Despite poring over the build document at length and noting that the tip and ground jacks are wired differently, it took me quite awhile to realise that I had (needless to say) wired them as I’d thought appropriate, not as the build doc specified. So, a fairly simple troubleshooting exercise to solve that particular problem. I still need to spend time biasing the CA3080 to minimise gate splutter but it does a nice job of taming excesses. The clip control accommodates active and passive pickups.
As always, thanks for reading and now ‘go build something,’ as Professor RnR Doctor Tim (aka @fig) enjoins us all to do. Have a good weekend y’all.
As always, thanks for reading and now ‘go build something,’ as Professor RnR Doctor Tim (aka @fig) enjoins us all to do. Have a good weekend y’all.

