I'm planning on building a Minnow, but I'm not interested in the envelope filter mode, so I'm thinking about hardwiring it to be in S&H mode only. I wanted to double check a couple things about doing that:
- If I do this, am I right in saying I can just not solder in IC1, D1, D2, R17, R19, R20, C7, R21, and the Filter, Attack, and Decay pots? Is there anything else I can omit?
- Which way do I jumper the mode switch pads? I'm thinking top & middle rows with the PCB oriented such that the LED pads are at the bottom?
