jessenator
Well-known member
- Build Rating
A scuffle at the bar. Two idiots beyond the tipsy are pointing at the barmaids, occasionally opening their mouths with a shred of coherence, swiping at passersby, nigh on spitting. The bouncer is asleep, and the shadowy loner in the corner calmly looks over, sighs, and looks down at his drink. The voices get a bit louder, and the doorman is still chatting up a hopeful patron. My boy picks up his pint, finishes it with a light lip smacking, and quietly stands up walking towards the bar with a casual gait.
"Let's go, boys" he flatly says as they are frog-marched out the back, and gives them the trouncing of their lives. All the two bloodied hooligans remember from the night's altercation were the snout, the gloves, and the …tightness of the jeans the antlered avenger was wearing.
Eyy, look, a not-Fallout-themed pedal for once : P
I've finally gotten around to finishing up the Dizzy Elk from @peccary who graciously send one my way. I took my time, and breadboarded to audtion a few bits. Went with MP38A spaceships for Q1 & Q2 & a towering AC127 (generously gifted by @jwin615 ) for Q3. The transistor is apparently a D9K, but the bag I had it in was labeled differently. But whatever, I like it. Tweaked C4 and C5 to have a larger gap (100x vs 10x), at 330n and 3n3 respectively.
The enclosure I decided to hand drill and laser my design. The original intent was to burn in a stencil of sorts and paint fill. While it didn't go like I originally envisioned, it turned out how I want. I like the antiqued look (hey, Fender adds a $10k surcharge for dentists who want this on their strats they'll never play
)
How it sound? I think this thing has some killer tone and flexibility for a fuzz. I've been fuzz touring since I got back into this, and it's a mighty fine machine.
Thanks for lookin …my eyes are up here.
thumbnail:
"Let's go, boys" he flatly says as they are frog-marched out the back, and gives them the trouncing of their lives. All the two bloodied hooligans remember from the night's altercation were the snout, the gloves, and the …tightness of the jeans the antlered avenger was wearing.
Eyy, look, a not-Fallout-themed pedal for once : P
I've finally gotten around to finishing up the Dizzy Elk from @peccary who graciously send one my way. I took my time, and breadboarded to audtion a few bits. Went with MP38A spaceships for Q1 & Q2 & a towering AC127 (generously gifted by @jwin615 ) for Q3. The transistor is apparently a D9K, but the bag I had it in was labeled differently. But whatever, I like it. Tweaked C4 and C5 to have a larger gap (100x vs 10x), at 330n and 3n3 respectively.
The enclosure I decided to hand drill and laser my design. The original intent was to burn in a stencil of sorts and paint fill. While it didn't go like I originally envisioned, it turned out how I want. I like the antiqued look (hey, Fender adds a $10k surcharge for dentists who want this on their strats they'll never play
)How it sound? I think this thing has some killer tone and flexibility for a fuzz. I've been fuzz touring since I got back into this, and it's a mighty fine machine.
Thanks for lookin …my eyes are up here.
thumbnail:
Last edited:
