maxamendel
Member
its SMD. I don't mind destroying this pedal, but does anyone have a schematic first? Google search turns up not thing. I like the OD, I just wanna hear the boost side. I'm going to have to trace it out but idk where to start
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
nonPPCB. Wasabi Overdrive. Boost side doesnt work but LED turns on
- Thread starter maxamendel
- Start date
maxamendel
Member
yes indeedIs this the Dano pedal?
maxamendel
Member
update, it's got a boost level switch, so that's where I started on the main board. switch is a two way with two leads, but there's never continuity between the two so I don't think it's spst open- closed. but the two leads go to separate resistors that measure 2k2 and 1k6 in circuit before meeting up again. and then on lead goes east to a capacitor and another guess to some IC
it's a double sided smd board so I got that far then called it a night.
it has a break out board on the footswitches with three leads going to the main board. it's a double pedal, so why three and not four leads i don't know.
I want to get into it, but I'm confused about why a boost circuit would have so much going on. I really just want a schematic.
it's a double sided smd board so I got that far then called it a night.
it has a break out board on the footswitches with three leads going to the main board. it's a double pedal, so why three and not four leads i don't know.
I want to get into it, but I'm confused about why a boost circuit would have so much going on. I really just want a schematic.