REQUEST Passive A/B/Y tayda drill template

[drgonzo1969]

Anybody got Tayda drill template for the Passive A/B/Y kicking around?

 

[Audandash]

Give me a few days and i will get one up. I do have the board and will confirm with measurements since the jacks are board mounted.

 

[Audandash]

Okay this should get you in the ballpark. This is “not verified” yet. I would check the measurements against your board to be certain with everything being board mounted. You may want to make the holes a little larger or ream them for wiggle room. This is based solely on the build doc.

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com