OD is Glorious
Well-known member
- Build Rating
Fun project. Somewhat easy to maneuver on the board, and the finished project is a useful pedal with varying levels of overdrive. The voice switch is subtle, and the gain switch is aggressive: it seems to go from Klon-like to Murder wasp. The overdrive is able to be dialed in very easily and you can also get fuzz-like distortion.
I used a matte orange Tayda enclosure with 15mm anodized aluminum knobs. I used a 5mm orange diffused LED. I used switch covers on the Taiway dpdt and spdt switches. There are Switchcraft jacks and a Lumberg D.C. jack in the case
. The decal was made in photoshop and then printed on my QL-1110NWB thermal ink printer.
Overall, I like it. I can hear some useable tones and it can get very loud.
I used a matte orange Tayda enclosure with 15mm anodized aluminum knobs. I used a 5mm orange diffused LED. I used switch covers on the Taiway dpdt and spdt switches. There are Switchcraft jacks and a Lumberg D.C. jack in the case
. The decal was made in photoshop and then printed on my QL-1110NWB thermal ink printer.Overall, I like it. I can hear some useable tones and it can get very loud.
