125B Ppcb Byzantium Flanger

[Audandash]

Its Robert’s standard 4 knob template its just not posted on the site. 3mm leds and rectangle power so adjust to taste.


https://drill.taydakits.com/box-designs/new?public_key=SW9XemNKTXNuRFFMVE5sYXU5bkNmQT09Cg==

 

[BQFS]

I was looking for a drill guide for the Byzantium Flanger and I have no idea where to look. I wouldn't mind ordering a complete enclosure with labels from Tayda if I only had some idea of how to accomplish that, but there doesn't seem to be any link for that either.

Any assistance would be very much appreciated.

 

[Audandash]

If you want to drill yourself any of the standard 4 knob templates will work from the pedalpcb shop. Look at the drill template for the nein fuzz. The drill template is a standard 4 knob which is what is linked above for tayda. That will get you the coordinates for Tayda to drill it. You have to add a box to your cart then add drilling service to your cart and lastly uv printing to your cart. Once you checkout you go to the Tayda Dashboard (where you upload your art) and wait for your order to show up. Once that happens you just choose the box you ordered and match it with your drilling and artwork. It sounds daunting but once you go through all the steps a few times its pretty easy. Definitely worth the effort. Here is a great read for the artwork. This is what I read to figure that part out. Its very well done. Its hard to fully get all the steps until you just pull the trigger and buy one. Just make sure you add the box, drilling and uv service to the order.

Steggo Studios Tayda UV Printing Tutorial

Jan 9, 2023

Steggo Studios Tayda UV Printing Tutorial

• Fingolfen
• Tutorials