fav13andacdc
Active member
Build Report - https://forum.pedalpcb.com/threads/terrarium-with-custom-tape-deck-module-release.30181/
Fork of the Daisy Seed Projects Github page I'm sure you are all familiar with. Simulates Hysteresis Tape Saturation and Automatic Double Tracking (ADT) on the other. Check the releases page for the .bin file. I have some more fine-tuning to do on this, but happy with how it's sounding so far.
github.com
Fork of the Daisy Seed Projects Github page I'm sure you are all familiar with. Simulates Hysteresis Tape Saturation and Automatic Double Tracking (ADT) on the other. Check the releases page for the .bin file. I have some more fine-tuning to do on this, but happy with how it's sounding so far.
GitHub - fav13andacdc/DaisySeed-TapeDeckModule: A fork of DaisySeedProjects to continue the development of a Dual-Sided TapeDeck Module (Saturation + Doubletracker)
A fork of DaisySeedProjects to continue the development of a Dual-Sided TapeDeck Module (Saturation + Doubletracker) - fav13andacdc/DaisySeed-TapeDeckModule
github.com
Controls:
Footswitches- Left Footswitch (FS1): Engages Side 1 (Tape Saturation). Automatically comes on when the pedal is engaged. Can be turned off using the Left Footswitch.
- Right Footswitch (FS2): Engages Side 2 (Through-Zero Doubletracker). Currently, this also acts as the True Bypass. So technically, Double-Tracking is always on. Use the Blend knob, described below, to take doubletracking out of the signal.
- Saturation - Pot1: Controls the drive into the tape machine. Lower settings provide subtle analog warmth; higher settings compress and distort as the virtual magnetic tape saturates.
- Tone - Pot2: Low-Pass Filter, very warm to bright.
- Level - Pot3: Master output volume. Only on when Tape Saturation is engaged.
- Lag Time - Pot4:A custom-curved control for the Doubletracker.
- 0% to 50% (Flange): Pushes and pulls the Lag Deck signal across the timing of the Reference Deck to generate tape flange.
- 50% to 75% (Chorus): Separates the tape decks enough to create a lush, widening chorus.
- 75% to 100% (Slap/Echo): Expands the delay time logarithmically up to 500ms for slapback and tape echo.
- Blend - Pot5: Crossfades between the Reference Deck and the Lag Deck.
- Wobble - Pot6: Controls the mechanical health of the tape machine. At 0, the tape drifts with microscopic analog imperfection. Turning it up increases the depth and speed of the randomized wow and flutter.
- Invert Toggle - TS1: Flips the phase of the Lag Deck.
- Voice Toggle - TS2: Switches between "Classic" (mastering-grade reel-to-reel saturation) and "Cassette" (squashed ALC compression).
Last edited: