This Week on the Breadboard: The Pushover Drive

[Chuck D. Bones]

If the mids are not strong enough when PUSH is turned down, then C1 can be increased to 15nF.
The MID cut freq can be shifted by increasing or decreasing C7 & C8.

 

[cooder]

You're killin' me.....

 

[temol]

Layout 1.3.2 is still on breadboard so I will soon convert it to 1.4.3 and upload a recording.

 

[temol]

1.4.3.
Parts 1, 2 and 3 - different gain and MID settings. In each part MID at min, noon, max.
Part 4 - hm.. I played with MID and PUSH pot. Probably...

Dropbox

www.dropbox.com

 

[Chuck D. Bones]

Was your Strat's Volume all the way up?

 

[temol]

99% yes. Why?

 

[Chuck D. Bones]

When the guitar's volume is turned up, the pickups & the PUSH knob interact. You get an upper midrange peak. I thought I was hearing that in the first half of part 4.

 

[cooder]

Time flies by doesn't it.... but we finally get there.
Being two pedals in one it is rather versatile and there's a lot from lowish gain to full on wall of fuzz, dime the push and its bass heavy yuuuuge even with a bridge pickup on Tele.
Noice.