Tommy III mini slide

[JimL]

I am working on a Tommy three. I’m wondering about this SPDT mini slide. Do I put it on the other side of this circuit board? And should it be accessible through the top of the pedal or do you have to open the pedal in order to engage the switch. I appreciate any help you could give me.

I checked other threads and I see somebody mounted it here on the top, but it looks like you’d have to open the pedal in order to engage. So I’m wondering if there’s other better ways.

 

[Nic]

That's an internal switch, set to your preference and forget.

 

[angelrulax]

You can use a spdt toggle switch and make It offboard. Place It on the pot side of the enclosure. Something like this.

 

[JimL]

I think I’m deciding to do it this way. Unless you guys see anything wrong with it.

 

[Locrian99]

I think I’m deciding to do it this way. Unless you guys see anything wrong with it.

I did mine with a sub mini so i coukd seitch it on the exterior. I think i connected mine with wires though, its been a few years. Its useful enough that i think it should be an exterior switch. On my timmy board i did up it was one of the mods i put on it.