Vox Conquerer Fuzz (Jext Telez White Pedal)

[churchmans]

Hello,

The bass, treble and mid boost switch all are not working.

Volume and gain work as intended but no tone controls at all.

Any help?

I can give you voltages and pictures upon request but is there anything I should check first?

 

[Feral Feline]

Hmm the signal HAS to go through the treble pot to get to the voice switch and bass... if the signal is getting to the output it's going through the Treble pot, somehow...


Defective treble pot?

I'd start by reflowing all solder points on the treble/bass/voice-switch...

 

[churchmans]

Thanks for getting back.
Reflowed the solder on the switch and pots.
The treble pot is giving me subtle changes but nothing else still.

Is there something else I could check from there?

 

[churchmans]

A CAUTIONARY TALE:
I finally opened this up after more than a year and found that the center lug of the treble pot wasn't even soldered...
Its easy to make stupid mistakes.
Now the pedal works and sounds beautiful.

Thanks @Feral Feline for your help!

 

[music6000]

Better Late than Never!

 

[Feral Feline]