Where to get EQ pots with center detent?

[BoyBastos]

I have an Aguilar opb2 that was given to me and it does not have any pots. Where can I get the 50k linear center detent pots? I saw one at best bass gear ( stacked) and it was $18. Any other places to get one for cheap? Stacked or not will work for my purposes. Thank you.

 

[jwin615]

24mm or 16mm?
solder lug or 90 legged?

 

[jwin615]

Or 9mm?

 

[jwin615]

https://cdn.shopify.com/s/files/1/0735/6835/4580/files/wiring-diagram-obp-1-v2.pdf?v=1711720101

Says 25kA per diagram. Looks like that preamp is boost only, so no center detent needed?
If doing a blend, highly recommend reading the MN taper no load wiring

 

[jwin615]

Stewmac has cts and alpha at a decent price.

 

[Feral Feline]

jwin615 for the win!

I'll add to the solder-lug vs 90º-legged: what about PCB mount?

Oooh and that pic makes me wonder...

Split-splined shaft or solid?
D-shaft ?
6mm or 6.35mm x what length?

If I ever have a centre-detent pot that needs replacing, I'll replace it with one that is NOT centre-detent — but that's just my preference.

@BoyBastos — When you say "stacked", do you mean dual-ganged or concentric?

 

[BoyBastos]

Sorry for the lack of info, 24mm, hopefully solder lugs but I can work with either. The OPB1 is boost only, the OPB2 is boost and cut.

 

[jwin615]

Ah. Gotcha.
Stewmac or All parts should have ya.

 

[temol]

Pickguard mounted or through the wood? Regular pot is ok for a pickguard but you need a long thread if you want to mount them through the wood. Unless you have really thin cavity wall.