Wiring 2 pedals in one enclosure help

C

chinaski

New member
Hello all.
This has probably been discussed tons of times, but I can’t find any threads about my specific need.
I’m building my first 2 effects in one box and would like to have either one or both on.
I don’t need any toggle switch between them or extra LEDs or anything. Just in and out jacks and one 9v, center negative jack.
Is there a diagram for this someone could point me to?
 
yeah its easy - just pretend they are two separate pedals, but instead of wiring up the audio jacks that would go between them, just run a wire from the OUT of one footswitch to the IN of the other.

Wire the 9v plug to both boards by twisting the two pos wires coming from each board together and then soldering them to the plug lead, and then same for the neg wires.
 
You must log in or register to reply here.
Back
Top