Latest activity

I have to try one of these tube builds. Maybe someday.

I have a 1590b with that same "does not work with all jack sizes". You got it all in there and it looks clean!

My first FV1 soldering, ya my smd skills are kaputs, but it works! I used a small flat wedge bit to solder it, that was tons of fun...

I started the course based on your recommendation. It’s exactly what I was looking for. I had some questions in one lesson and again...

Hey everyone, I made the Pedal Division PCB course, I'm glad to see it's been a saving grace for those who felt they didn't get the...

I'd use 10Ω for the relay power. 100μF + 100nF is good for relay filtering. If you have a high quality power supply, like a Voodoo...

Here is my 3rd ringer. This time it’s stock except I used matched 1N60s. No bypass- I don’t need it. It’s going to be plugged into a...

Went nuts and even did some graphic work.. White washer just to trigger folks too… 😜

The c2ce projects are so nice to build. Well thought out design, great docs, provided tayda drill templates, graphic art for uv...

should i have any series resistor for the relay power, or just skip it entirely? and are 100u+100n the right filtering caps for the relay?

R101 is too large for the amount of relay current you'll have. I recommend providing a separate filtered power rail for the relay so...

I have to try one of these tube builds. Maybe someday.

Here is my 3rd ringer. This time it’s stock except I used matched 1N60s. No bypass- I don’t need it. It’s going to be plugged into a...

I made some footswitches for a bunch of friends who had eleven racks years ago and gave them goofy names based on the forum handle or...

Great build, even if it didn't float your boat. Initially... Sometimes it's just a mood thing. I've come across old build threads on...