T W on the BB with Chuck and Gator: Hellbender/Pagebender Hybrid

[Chuck D. Bones]

It's not supposed to to that. Dialing down the mids cuts only the mids around 650Hz. Max cut is 12dB. Something is definitely wrong with board.
Maybe you can get a 2nd set of eyes to check your schematic & board routing. Also visually check the soldering for shorts.

 

[Synchrony Pedalworks]

It's not supposed to to that. Dialing down the mids cuts only the mids around 650Hz. Max cut is 12dB. Something is definitely wrong with board.
Maybe you can get a 2nd set of eyes to check your schematic & board routing. Also visually check the soldering for shorts.

Thanks. I thought something was off. I'll start a separate troubleshooting thread.

 

[Synchrony Pedalworks]

I got it working! By the way, this is a balling pedal! I have played a lot of Tonebenders, and this one, is up there with the best. I like that it does not require finicky, germanium transistors. Great Job!