The Gator

I could use some opinions of those who know more than me. In the lamp driver portion of the circuit R22 and r26 are on both sides of the...

I've discovered that a cap to a chapstick fits snuggly over my LDR array. My build couldn't fit any tighter in a 1590bb. After grinding...

Well, they are extremely broad spectrum LDRs, so leakage of light would be a problem. Unless a purple lens was used. Also physically...

Oh. I guess I totally missed what the extra pots are on your original build. I like the simple rate led mod. I just thought about doing...

Nevermind. I think I understand now. Different question: if you mounted the LDRs and the bulb on the other side of the circuit board...

Thank you for the replies. I am looking at the different mod schematics posted early in this thread and noticed in the analog LFO...

Hey thank you for posting all of these mods and the great high lighted sections and details! I am getting ready to start building mine...

Thank you very much for the help! I also noticed the documentation didn't spell out any electrolytic caps but the schematic shows C9...

Wasn't sure where to ask this. Building a deflector reverb and noticed the documentation calls for a 6.2K ohm resistor for the R14...

Awesome! However, I hope soon. I'm excited to give it go. I noticed I cannot select the pre-soldered FV-1 option on the reverb boards...

Thank you very much! That is really what I wanted hear! I would love a pre-soldered FV-1 spatialist board or deflector board. I'm...

I am interested in building a reverb pedal, however my understanding of the Spin FV-1 is limited. Basically can I purchase one from...

thank you. Actually I did not cut a square hole. I just did it like MXR does now. I drilled a large round hole and the DC jack just...

This is a pedalpcb build of the Super Stevie board. I really like this circuit. low parts count and has a really great sound with single...

Great. Thank you very much for your help.