Rockman X100 Rev. 10 Schematic Release

[Cybercow]

Cybercow

Thanks for the quick reply back.

On your original X100 mode switch you showing bottom right corner how to hook up the Rockman original SW101 mode switching to your circuit, but I do not see how to connect your new one-of-four switching schematic.

For the "One-of_Four" (radio button style) switching, the "A1 - A5" & "B1 - B5" values are what transpose over to the original SW101 diagram.

Do the two different one-of-four switching schematics do the same thing.

Yes, they are simply drawn out differently.

I do not have the CD4042 and it is not sold at Tayda, anyway to use CD4013

No. The CD4042 is critical for the "One-of_Four" (radio button style) switching. The CD4013 is a CMOS Dual D-Type Flip-Flop and the CD402 is a CMOS Quad Clocked D-Latch - they work entirely different from one another. Mouser, DigiKey and several safe eBay sellers have the CD4042.

 

[caspercody]

Looking at the schematic then, would I still need the four diodes in the purple box and everything to the right? And the bottom schematic wiring would replace the wiring to the left of the four diodes in the purple box with no connection to Q1

 

[Cybercow]

Looking at the schematic then, would I still need the four diodes in the purple box and everything to the right? And the bottom schematic wiring would replace the wiring to the left of the four diodes in the purple box with no connection to Q1

Correct.